On the other hand, adult-only homes probably won’t need to dust so often..
Clean the Dirt Devil’s Tools.If your Dirt Devil comes with extra tools and accessories, make sure to give these a deep clean too..
The crevice tool, in particular, may have developed a serious blockage if it hasn’t been cleaned for a while.Check both ends to see whether there’s a clump of hair, fluff, or other debris that needs to be pulled out.. You can usually rinse non-motorised tools in cool water and wipe with a microfibre cloth.Allow the tools to fully dry before using them again.
As with all vacuum cleaners, motorised tools should not be rinsed or submerged.. 6.(Optional) Dust the Rest of the Vacuum Exterior.
If you want a true deep clean, then get a soft dusting brush and use it to clear any dust from the rest of the vacuum’s exterior.
Unclip any hoses on your Dirt Devil to access all the inlets and outlets.. Once you’ve got rid of the worst of the dust, follow up with a microfibre cloth (you can make this slightly damp but not wet) to remove the rest.. Never use a wet or damp cloth anywhere near the vacuum’s motor or power cord, even when the vacuum is switched off.. Summary.Double check that the hose, wand, and other parts of the vacuum are properly clicked into place.. No Light: No Power or Other Error.
A blank indicator light usually just means that the vacuum is switched off.However, it can also indicate an error when the vacuum has power and is switched on..
If this is happening to your vacuum, we recommend emptying the dust cup, cleaning the filters, removing any blockages in the floorhead or brush roll, and checking the entrance and exit to the dust cup for clogs.If this doesn’t solve the issue you may need to contact Shark’s support team..
(Editor: Automatic Lighting Kits)